We offer many ways to customize your Pakboat kayak to be just what you need. Check out the options. There are a variety of accessories available for Pakboat folding kayaks. You’ll find them in the list below. For more information about the accessory, click the ‘more info’ toggle to view images and a more detailed description of the item. If you are looking for an accessory to specifically fit an older Pakboat model, click here for the closeouts and discounts page.
If you have questions or wish to purchase directly from Pakboats, please call us at 603-632-9500 or e-mail us at email@example.com.
You can download a PDF of the complete Pakboats Price List by clicking here.
Pakboat Kayak Accessories
The Saco deck is made of 600 denier polyurethane coated polyester fabric with an attractive diamond shaped rip-stop pattern. The cockpit is 36 inches long to make it easy to get in and out of the seat. Saco decks have a solid support structure built in, and they can support a deck bag. The decks weigh 4.9 pounds (2.2 kg). Decks for 2014 and newer Sacos have deck rigging included, and color options are blue or yellow.
Saranac decks made of 600 denier polyurethane coated polyester fabric with an attractive diamond shaped rip-stop pattern. The cockpits are 36 inches long to make it easy to get in and out of the seat. The decks have a solid support structure built in, and they can support deck loads. The double deck weighs 8 pounds (3.6 kg). Decks for 2014 and newer Puffin Saranacs have deck rigging attached, and color options are blue or yellow.
The Pakboats Spray Skirt has two mesh pockets, one on each side, and a tensioned flexible bar across elevates the skirt to prevent pooling of water. The spray skirt is made of nylon. It fits both Puffins and XT kayaks, including the Quest (Cockpit inside dimensions are 33″ (84 cm) long and 17″ (43 cm) wide). Since 2015, these Spray Skirts have been made in the USA.
The Cockpit Cover is made of the same rip-stop material as the Puffin and XT decks with a lighter sleeve around the perimeter. The cover is secured with a draw cord and wedge lock combination.
The foot rest has a comfortable inflatable bar across to rest feet against. The position is adjustable while on the water by a strap attached under the forward edge of the seat. The foot rest can be installed in both Puffins and XTs.
The PakPod combines the functions of a Deck Bag, Backpack, and Paddle Float self rescue device in a new and unique way. The PakPod comes with a separate webbing harness that attaches to the kayak (or canoe). The PakPod, itself, attaches to the harness with two quick-release buckles. This arrangement makes it easy to remove the PakPod from the boat – or to reattach it, even while in the water. To read more about the PakPod, click here.
Repair Kit Made specifically for PU (polyurethane) boats, the repair kit includes fabric patches for the sides and bottom, a can of adhesive and comes in a draw string nylon bag.
When ordering, please indicate hull color.
Repair Kit Made specifically for PVC (polyvinyl chloride) boats, the repair kit includes fabric patches for the sides and bottom, a can of adhesive and comes in a draw string nylon bag.
When ordering, please indicate hull color.
Pakboats has adapted Scotty’s standard Mount Board so it will clamp securely to the gunwales on Puffins and PakCanoes. The Mount Board accepts three of Scotty’s accessories in any combination. You can have three fishing rods. You can have just one or two rods and a cup holder and/or GPS. There are quite a few possible combinations to suit your needs.
Foot controls for the rudder are added as additional pedals on the foot pegs, and the pedal position can be adjusted freely without affecting the rudder control wires. The SmartTrack rudder housing can be installed with a simple bracket that is screwed to the end of the kayak skin. Due to a very low pivot point, the rudder blade is small and minimizes effects of any cross winds. For sailing or any other application requiring more rudder surface, a larger rudder blade is available. Changing rudder blades is very quick and easy.
The foot pegs are easily adjustable from the seat while under way, and they clamp securely to the braces on the frame sides. They can be installed to span a cross rib or fit between two cross ribs, so foot pegs can be placed anywhere they may be needed. Once installed, the attachments can be left in place. Only the foot peg rails with the pedals need to be removed when the boat is disassembled.
The Pakboats kayak strap is 1 inch (2.5 cm) wide, made of custom woven polyester with a strong spring loaded metal cam buckle. The strap is perfect when you want to secure your kayak to a roof rack or trailer. The kayak strap is 9 ft (270 cm) length.